LED lamp PLN-S Office SLS with a standby mode and motion sensor (SLS technology) for corridors and elevator halls in residential and administrative buildings, for warehouses, other places of temporary stay of people, for ceilings, including "ARMSTRONG", "GRILLATO".
Power in standby mode 7 W, power in full brightness mode 36 W, luminous flux in standby mode 1000 Lm, luminous flux in full brightness mode 5000 Lm. Color temperature 5000 K, power factor not less than 0.95 at nominal supply voltage 220V, degree of protection IP40.
A distinctive feature is a fast but smooth (about 1 sec) increase in brightness from the standby level to full brightness and a slow gradual (about 10 sec) decrease in brightness when switching from full brightness to standby. Working most of the time in the standby brightness mode at low power allows you to have a longer service life. Compared to an ordinary LED lamp without a sensor, the average savings on a single lamp is up to 7 rubles per day (when working around the clock).
Uninterruptible power supply unit is possible
Specifications
Input power | 36 W |
Luminous flux | 4500 lm |
Input voltage | 230 V (AC) |
IP Code | IP40 |
Sensors | motion (range 8-12 m) |
Body material | metal, body thickness 0.5 mm, hot-dry powder coating |
RAL color | White (RAL-9016), Silver (gray) (RAL-9006) |
Placement height | 2,5-4 m |
Beam angle | 120° |
Mounting | embedded, overhead, suspended |
Diffuser | matte |
Warranty | 5 year |
Areas of use
- Lighting of corridors and elevator halls
- warehouse lighting
- lighting of places of temporary stay of people
* The retail prices shown are for reference only and are subject to change without notice.